Home About Clients Testimonials Resources Contact

Dissolved Ozone

DO3 - Portable Dissolved Ozone Detector

Nanotechnology enabled electrochemical sensor makes dissolved ozone testing fast and simple.

Features:

User replaceable battery; Portable power for months of detection

Stores up to 10 readings for remote sampling

Simple and repeatable bottle sampling method

No fouling of sensor; No special probes

Digital Display; No Consumables, No Chemistries, No Color Matching

 

Specifications:

  • Range: 0.00-5.00 mg/L (ppm in water by volume)
  • Display: digital readout in .01 mg/L increments
  • Measurement principle: gaseous diffusion
  • Size: 79.5 × 39.6 × 34.5 mm (3.13 × 1.56 × 1.36 in)
  • Weight: 49 grams (< 2 oz)
  • Battery: User replaceable CR2450 coin battery

 

 

 

DOM -1 Dissolved Ozone Monitor

 

Typical applications:

  • Bottled water plants
  • Food treatment systems
  • Equipment sterilizing systems
  • Wastewater treatment monitoring
  • Factory pure water process and control

Features:

  • Specific to ozone
  • Insensitive to most interfering chemicals such as salt and chlorine
  • Low cost and easily replaceable parts
  • User can easily calibrate the instrument to any in-house standard
  • Set-point relay for alarm or system control
  • 4-20 mA output to PLC or other remote readouts and controllers

Requirements:

  • Water feed at > 14 psi (1 bar)
  • .15 liters/minute (3 gallons/hour) flow to drain or reclaim
  • 12 VDC 800 mA power supply

Specifications:

  • Accuracy: better than 20%. 10% typical
  • Readout: 0-2 ppm in .01 ppm increments
  • Lowest reading: .03 ppm

© Environmental Analytical Systems 2008