| The Microdust Pro |
Demand for this product has more than doubled in less than a year. The compact easy to use dust monitor is said to be the most versatile real time instrument available and features a measurement capability from 1ugm-3 to 2500ugm-3. It is the only hand-held real time dust monitor capable of graphically presenting variations in dust concentration on a real time scrolling graph.
Casella
London Limited first started producing a real time dust monitor in 1989, named
the AMS950 (Aerosol Monitoring System). Since that time, the product has undergone
many changes, most notably the introduction of the Microdust in 1998. Casella
CEL Limited are pleased to be launching the new Microdust pro– an exciting
new product for the occupational health and real time dust monitoring market.The
Microdust pro is a natural progression from its predecessor and incorporates
many new and innovative features. For example, it is the only hand-held real
time dust monitor on the market capable of graphically presenting variations
in dust concentration on a real time scrolling graph no longer is it necessary
to wait to analyze results on a PC.
A large graphics LCD display has been combined with the power of a microprocessor
to provide a user friendly interface with clear and versatile presentation of
data and menus.
The Microdust pro represents probably the most versatile real time instrument
available with an incredible measurement capability from 1m gm-3 to 2500 mgm-3
in one compact and easy to use instrument. Recent advances made by our research
engineers have refined the optics within the probe, offering improved performance
and stability with the near forward light scatter technique employed.
Unlike previous versions, the pro now features software calibration routines
for zero and span calibrations which eliminate the need for manual adjustments
and trimming tools. Up to 4 user defined, memory backed up calibration routines
are also available for differing dust types.
The pro also features the option of alkaline or rechargeable cells with internal
fast charge circuit, comprehensive data logger providing over 15,700 data points
and new 32bit WinDust pro software.
click here to read more about Indoor Air Quality 31kb Word Document
click here to read "The truth about the Air Quality in Ontario" 35kb Word Document
click here for a power point presentation on the Microdust Pro 1.79 mb PPP
click here for a power point presentation on the Probe 633 kb PPP
click here for
Microdust Pro FAQ's 403 kb
click here
to download the brochure 190 kb
| Topas by Turnkey Instruments |
TOPAS (Turnkey
Optical Particle Analysis System) is a fixed station monitor designed to continuously
record environmental PM10, PM2.5 and PM1 particles.
The instrument is housed in a compact, unobtrusive stainless steel wall box with IP66 protection. Inlet heating is fitted as standard. All controls and displays are located behind a lockable door.
Several sites can be networked together to form a city wide monitoring system. Sites can be connected by radio, telephone or GSM modems, or fixed wiring and controlled by one PC using AirQ software.
click here for the brochure pdf 309KB
| Osiris by Turnkey Instruments |
Portable,
Direct Reading, Airborne Particle Sampler
One of the family of Turnkey's direct reading airborne particle monitors, OSIRIS is a general purpose instrument which can be used as a portable instrument or deployed in a semi-permanent installation.
Fitted into a Turnkey Lamp Post Box, OSIRIS can be quickly deployed to study
short or long term pollution hotspots in
towns and cities and exceedance areas rapidly determined.
OSIRIS will continuously indicate the concentration of TSP, PM10, PM2.5 and PM1 particles with a resolution of 0.1 micrograms per cubic metre. In its workplace mode, it will indicate inhalable, thoracic and respirable concentrations.
click here for the brochure pdf 309KB
| DustMate by Turnkey Instruments |
Hand-Held
Direct Reading Fume and Dust Detector.
DustMate is a hand-held instrument with a very fast response which has been designed to locate sources of workplace airborne dust and fumes even at very low concentrations.
Highly effective for checking air quality within buildings. Its one second time resolution also allows it to be used as a road side indicator to identify high pollution vehicles as they pass.
The instrument will continuously indicate the concentration of thoracic, inhalable and respirable particles down to 0.1 micrograms per cubic metre. In its environmental mode, it will indicate TSP, PM10, PM2.5 and PM1 concentrates.
click here for the brochure pdf 309KB
| AirQ for Windows by Turnkey Instruments |
Environment
Monitoring Software
AirQ for Windows software will collect, manage and display results from our range of environment sensors. These sensors can be used to measure air quality information including PM10 and PM2.5 particles, pollutant gasses, and noise levels.
Climatic conditions such as ambient temperature, wind speed, wind heading,
and relative humidity can also be recorded as an aid to tracking the source
of the pollution. For example, with AirQ a live on screen Pollution Rose can
readily be created which plots measurements against wind heading on a polar
chart.
click here for the brochure pdf 309KB
| ARTI 6-Channel Particle Counter HHPC-6 |
|
 |
home
sitemap
EAS service
links
testimonials
Environmental
Analytical Systems
286 Mask Island Drive
Barry's Bay, Ontario, Canada K0J 1B0
Phone:
613 756 0101
Toll Free (Canada only):
1 800 427 8591
Fax: 613 756 0909
email: info@enviro-analytical.com
©Environmental Analytical Systems 2003
